OceanWaveSail Free Searchable Sailboats Database

ANNIE 30

ANNIE 30 built by Morris Yachts (USA) and designed by Chuck Paine. Her first hull was built in 1980 with an overall lengh of 8.97 m or 29.42 ft long

Compare Sailboats

ANNIE 30 Sailboat Specifications​

Features

Overall Length (LOA) m / ft8.97 m / 29.42 ft
Builder(s)Morris Yachts
Designer(s)Chuck Paine
CountryUnited States
Hull TypeLong keel w/trans. hung rudder
Number of Hulls Built16
First Hull Built1980
Ballast Typelead
Rigging TypeMasthead Sloop
UnsinkableNo
TrailerableNo
Freshwater Tank Capacity lt/gal140 L / 37 gal
Ballast Ratio39.9

Dimensions

Overall Length (LOA) 8.97 m / 29.42 ft
Waterline Length (LWL)7.47 m / 24.50 ft
Beam (width)2.88 m / 9.46 ft
Draft1.37 m / 4.50 ft
Light Displacement (MLC) 5002 kg / 11027 lb
Maximum Displacement5002 kg / 11027 lb
Ballast Weight1996 kg / 4400 lb

Performance

Capsize Screening Formula (CSF)1.70
Comfort Ratio32.89
Displacement-Length Ratio (DLR)334.74
Ballast Ratio39.9
Sail Area to Displacement14.78

Above Deck

Estimated Forestay Length12.47 m / 40.90 ft
Reported Sail Area42.36 m² / 456.00 ft²
Total Sail Area41.93 m² / 451.37 ft²
Mainsail Area19.60 m² / 210.94 ft²
I39.00 ft * 11.89 m
J12.33 ft * 3.76 m
P33.75 ft * 10.29 m
E12.50 ft * 3.81 m
error: Content is protected !!