OceanWaveSail Free Searchable Sailboats Database

CATALINA 27 TALL RIG

Catalina 27 Tall rig is a Cruising sailboat built by Catalina Yachts and designed by Frank Butler\xa0&\xa0Robert Finch. Her first hull was built in 1971 and a Deck stepped mast mast configuration.

Compare Sailboats

CATALINA 27 TALL RIG Sailboat Specifications​

Features

Builder(s)Catalina Yachts
Designer(s)Frank Butler\xa0&\xa0Robert Finch
BrandCatalina
VersionTall rig
categoryCruising sailboat
CountryUnited States
Hull TypeMonohull
Number of Hulls Built6662
First Hull Built1971
Last Hull Built1991
AppendagesKeel fin without bulb
HelmSingle tiller
RudderSingle spade rudder
CockpitClosed aft cockpit
Ballast TypeLead
Rigging TypeSloop Marconi masthead
Mast LayoutDeck stepped mast
Number of Cabin(s)1
Number of Head(s)1
UnsinkableNo
TrailerableNo
Ballast Ratio0.39

Dimensions

Hull Length8.18 m / 26.10 ft
Waterline Length (LWL)6.63 m / 21.10 ft
Beam (width)2.08 m / 6.10 ft
Draft1.22 m / 4 ft
Light Displacement (MLC) 3105 kg / 6845 lb
Ballast Weight1225 kg / 2701 lb

Performance

Critical Hull Speed6.25 knots
Displacement-Length Ratio (DLR)302
Ballast Ratio0.39
Upwind Sail Area to Displacement15.89 m²/T / 171 ft²/T

Above Deck

Mast LayoutDeck stepped mast
Rotating SparsNo
Number of Levels of Spreaders1
Spreaders Angle0 °
Spars ConstructionAluminum spars
Standing Rigging1x19 strand wire continuous
Upwind Sail Area33.82 m² / 364 ft²
Mainsail Area13.38 m² / 144 ft²
I36 ft * 10.97 m
J12.2 ft * 3.72 m
P29.8 ft * 9.04 m
E9.7 ft * 2.94 m

Engine Room

Engine(s)1 inboard engine

Below Deck

Head(s)1
error: Content is protected !!