OceanWaveSail Free Searchable Sailboats Database

CATALINA 310 WING KEEL

Catalina 310 Wing keel is a Cruising sailboat built by Catalina Yachts and designed by Gerry Douglas. Her first hull was built in 1999 and a Keel stepped mast mast configuration.

Compare Sailboats

CATALINA 310 WING KEEL Sailboat Specifications​

Features

Builder(s)Catalina Yachts
Designer(s)Gerry Douglas
BrandCatalina
VersionWing keel
categoryCruising sailboat
CountryUnited States
Hull TypeMonohull
First Hull Built1999
Last Hull Built2012
AppendagesKeel wing keel
HelmSingle helm wheel
RudderSingle spade rudder
CockpitOpen aft cockpit
Ballast TypeLead
Rigging TypeSloop Marconi masthead
Mast LayoutKeel stepped mast
Number of Cabin(s)2
Number of Head(s)1
UnsinkableNo
TrailerableNo
Freshwater Tank Capacity lt/gal208 L / 54.9 gal
Ballast Ratio0.39

Dimensions

Hull Length9.49 m / 31.1 ft
Waterline Length (LWL)8.08 m / 26.6 ft
Beam (width)3.51 m / 11.6 ft
Draft1.22 m / 4 ft
Light Displacement (MLC) 4672 kg / 10300 lb
Ballast Weight1814 kg / 3999 lb

Performance

Critical Hull Speed6.90 knots
Displacement-Length Ratio (DLR)251
Ballast Ratio0.39
Upwind Sail Area to Displacement16.29 m²/T / 175 ft²/T

Above Deck

Mast LayoutKeel stepped mast
Rotating SparsNo
Number of Levels of Spreaders2
Spreaders Angle0 °
Spars ConstructionAluminum spars
Standing Rigging1x19 strand wire
Upwind Sail Area45.52 m² / 490 ft²

Engine Room

Engine(s)1 inboard engine
Engine(s) Power26 HP
Fuel typeDiesel
Fuel Tank Capacity76 L / 20.1 gal

Below Deck

Head(s)1
error: Content is protected !!