Home » Sailboat

Sailboats data search of over 10000 sailing boats, with filters to pin down those of interest to you and lots of details.

FARR PHASE 4

FARR PHASE 4 built by Binks Yacht Contructions (AU) and designed by Bruce Farr. Her first hull was built in 1988 with an overall lengh of 12.00 m or 39.37 ft long

 Download Boat's Information to PDF

FARR PHASE 4 Sailboat Specifications​

Features

Overall Length (LOA) m / ft12.00 m / 39.37 ft
Builder(s)Binks Yacht Contructions
Designer(s)Bruce Farr
BrandFarr
CountryAustralia
Hull TypeFin w/bulb & spade rudder
First Hull Built1988
Rigging TypeMasthead Sloop
UnsinkableNo
TrailerableNo
Freshwater Tank Capacity lt/gal681 L / 180 gal
Ballast Ratio37.62

Dimensions

Overall Length (LOA) 12.00 m / 39.37 ft
Waterline Length (LWL)9.86 m / 32.35 ft
Beam (width)3.77 m / 12.37 ft
Draft1.70 m / 5.58 ft
Light Displacement (MLC) 5908 kg / 13025 lb
Maximum Displacement5908 kg / 13025 lb
Ballast Weight2223 kg / 4900 lb

Performance

Capsize Screening Formula (CSF)2.11
Comfort Ratio20.5
Displacement-Length Ratio (DLR)171.75
Ballast Ratio37.62
Sail Area to Displacement18.39

Above Deck

Estimated Forestay Length14.93 m / 48.97 ft
Reported Sail Area58.90 m² / 634.00 ft²
Total Sail Area58.94 m² / 634.42 ft²
Mainsail Area29.26 m² / 314.95 ft²
I47.05 ft * 14.34 m
J13.58 ft * 4.14 m
P40.85 ft * 12.45 m
E15.42 ft * 4.70 m
error: Content is protected !!