OceanWaveSail Free Searchable Sailboats Database

GIB SEA 105 PLUS STANDARD

Gib Sea 105 Plus Standard is a Cruising sailboat built by Gibert Marine and designed by Joubert Nivelt Design. Her first hull was built in 1980 and a Deck stepped mast mast configuration.

Compare Sailboats

GIB SEA 105 PLUS STANDARD Sailboat Specifications​

Features

Builder(s)Gilbert Marine
Designer(s)Joubert Nivelt Design
BrandGibSea
SeriesGibSea
VersionStandard
categoryCruising sailboat
CountryFrance
Hull TypeMonohull
Number of Hulls Built359
First Hull Built1980
Last Hull Built1987
AppendagesKeel fin without bulb
HelmSingle tiller (helm wheel in option)
RudderSingle rudder on skeg
CockpitClosed aft cockpit
Ballast TypeCast iron
Rigging TypeSloop Marconi masthead
Mast LayoutDeck stepped mast
Number of Cabin(s)2
Number of Berth(s)8
Number of Head(s)1
UnsinkableNo
TrailerableNo
Freshwater Tank Capacity lt/gal320 L / 84.5 gal
Ballast Ratio0.37

Dimensions

Hull Length10.45 m / 34.4 ft
Waterline Length (LWL)8.95 m / 29.5 ft
Beam (width)3.6 m / 11.10 ft
Draft1.8 m / 5.11 ft
Light Displacement (MLC) 4600 kg / 10141 lb
Ballast Weight1700 kg / 3748 lb

Performance

Critical Hull Speed7.26 knots
Displacement-Length Ratio (DLR)182
Ballast Ratio0.37
Upwind Sail Area to Displacement25.67 m²/T / 276 ft²/T
Downwind Sail Area to Displacement43.93 m²/T / 473 ft²/T

Above Deck

Mast LayoutDeck stepped mast
Rotating SparsNo
Number of Levels of Spreaders2
Spreaders Angle0 °
Spars ConstructionAluminum spars
Standing Rigging1x19 strand wire
Upwind Sail Area71 m² / 764 ft²
Downwind Sail Area121.5 m² / 1308 ft²
Mainsail Area25.5 m² / 274 ft²
Genoa Area45.5 m² / 490 ft²
I38.2 ft * 11.65 m
J12.10 ft * 3.9 m
P35.5 ft * 10.8 m
E12.6 ft * 3.8 m

Engine Room

Engine(s)1 inboard engine
Engine(s) Power28 HP
Fuel typeDiesel
Fuel Tank Capacity100 L / 26.4 gal

Below Deck

Fridge Capacity70 L / 18.5 gal
Head(s)1
Maximum Headroom6 ft * 1.83 m
Head Headroom5.7 ft * 1.72 m
error: Content is protected !!