Home » Sailboat

Sailboats data search of over 10000 sailing boats, with filters to pin down those of interest to you and lots of details.


Hallberg-Rassy 94 Kutter is a Motorsailer built by Hallberg-Rassy and designed by Olle Enderlein\xa0&\xa0Christoph Rassy. Her first hull was built in 1981 and a Deck stepped mast mast configuration.

 Download Boat's Information to PDF

HALLBERG-RASSY 94 KUTTER Sailboat Specifications​


Overall Length (LOA) m / ft9.40 m / 30.84 ft
Designer(s)Olle Enderlein\xa0&\xa0Christoph Rassy
Hull TypeMonohull
Number of Hulls Built195
First Hull Built1981
Last Hull Built1994
AppendagesKeel full keel
HelmSingle tiller (helm wheel in option)
RudderSingle rudder on skeg
CockpitClosed aft cockpit
Ballast TypeSteel incapsulated in deep GRP bilge
Rigging TypeSloop Marconi masthead
Mast LayoutDeck stepped mast
Number of Cabin(s)1
Number of Head(s)1
Freshwater Tank Capacity lt/gal150 L / 39.6 gal
Ballast Ratio0.35


Overall Length (LOA) 9.40 m / 30.84 ft
Hull Length9.4 m / 30.10 ft
Waterline Length (LWL)8.56 m /
Beam (width)3.25 m / 10.8 ft
Draft1.15 m / 3.10 ft
Light Displacement (MLC) 5200 kg / 11464 lb
Maximum Displacement5200 kg / 11464 lb
Ballast Weight1800 kg / 3968 lb


Capsize Screening Formula (CSF)1.89
Comfort Ratio26.2
Displacement-Length Ratio (DLR)230.66
Ballast Ratio0.35
Sail Area to Displacement11.21
Upwind Sail Area to Displacement11.33 m²/T / 122 ft²/T

Above Deck

Mast LayoutDeck stepped mast
Mast Height from DWL11.22 m / 36.10 ft
Rotating SparsNo
Number of Levels of Spreaders1
Spreaders Angle0 °
Spars ConstructionAluminum spars
Standing Rigging1x19 strand wire continuous
Reported Sail Area32.98 m² / 355.00 ft²
Upwind Sail Area34 m² / 366 ft²
Mainsail Area15 m² / 161 ft²
Genoa Area19 m² / 205 ft²

Engine Room

Engine(s)1 inboard engine
Engine(s) Power43 HP
Fuel typeDiesel
Fuel Tank Capacity150 L / 39.6 gal

Below Deck

Fridge Capacity70 L / 18.5 gal
error: Content is protected !!