OceanWaveSail Free Searchable Sailboats Database

IMPRESSION 35

Impression 35 is a Cruising sailboat built by Elan Yachts and designed by Humphreys Yacht Design. Her first hull was built in 2014 with an overall lengh of 9.99 m or 32.10 ft long and a Deck stepped mast mast configuration.

Compare Sailboats

IMPRESSION 35 Sailboat Specifications​

Features

Overall Length (LOA) m / ft9.99 m / 32.10 ft
Builder(s)Elan d.o.o.
Designer(s)Humphreys Yacht Design
BrandElan
SeriesImpression
categoryCruising sailboat
CountrySlovenia
Hull TypeMonohull
First Hull Built2014
Last Hull Built2018
AppendagesKeel L-shaped keel (with bulb)
HelmTwin helm wheels
RudderSingle spade rudder
CockpitClosing aft cockpit with opening system
Rigging TypeSloop Marconi fractional
Mast LayoutDeck stepped mast
Number of Head(s)1
UnsinkableNo
TrailerableNo
Freshwater Tank Capacity lt/gal238 L / 62.9 gal
Ballast Ratio0.31

Dimensions

Overall Length (LOA) 9.99 m / 32.10 ft
Hull Length9.99 m / 32.10 ft
Waterline Length (LWL)8.79 m / 28.10 ft
Beam (width)3.49 m / 11.6 ft
Draft1.6 m / 5.2 ft
Light Displacement (MLC) 5874 kg / 12950 lb
Ballast Weight1820 kg / 4012 lb

Performance

Critical Hull Speed7.20 knots
Displacement-Length Ratio (DLR)245
Ballast Ratio0.31
Upwind Sail Area to Displacement18.12 m²/T / 195 ft²/T
Downwind Sail Area to Displacement32.25 m²/T / 347 ft²/T

Above Deck

Mast LayoutDeck stepped mast
Mast Height from DWL16 m / 52.6 ft
Rotating SparsNo
Number of Levels of Spreaders2
Spreaders AngleSwept-back
Spars ConstructionAluminum spars
Standing Rigging1x19 strand wire
Upwind Sail Area59 m² / 635 ft²
Downwind Sail Area105 m² / 1130 ft²
Mainsail Area28 m² / 301 ft²
Genoa Area31 m² / 334 ft²
I41 ft * 12.5 m
J11.11 ft * 3.63 m
P38.2 ft * 11.64 m
E13.2 ft * 4.01 m

Engine Room

Engine(s)1 inboard engine
Fuel typeDiesel
Fuel Tank Capacity85 L / 22.5 gal

Below Deck

Head(s)1
Maximum Headroom6.11 ft * 2.1 m