Home » Sailboat

Sailboats data search of over 10000 sailing boats, with filters to pin down those of interest to you and lots of details.

OYSTER 475 STANDARD

Oyster 475 Standard is a Offshore cruising sailboat built by Oyster and designed by Holman & Pye. Her first hull was built in 2012 with an overall lengh of 14.81 m or 48.7 ft long and a Keel stepped mast mast configuration.

 Download Boat's Information to PDF

OYSTER 475 STANDARD Sailboat Specifications​

Features

Overall Length (LOA) m / ft14.81 m / 48.7 ft
Builder(s)Oyster Marine
Designer(s)Holman & Pye
BrandOyster
VersionStandard
categoryOffshore cruising sailboat
CountryUnited Kingdom
Hull TypeMonohull
First Hull Built2012
Last Hull Built2018
AppendagesKeel L-shaped keel (with bulb)
HelmSingle helm wheel
RudderSingle rudder on skeg
CockpitCenter cockpit
Rigging TypeSloop Marconi masthead
Mast LayoutKeel stepped mast
Number of Head(s)2
UnsinkableNo
TrailerableNo
Freshwater Tank Capacity lt/gal650 L / 171.7 gal

Dimensions

Overall Length (LOA) 14.81 m / 48.7 ft
Hull Length14.48 m / 47.6 ft
Waterline Length (LWL)12.36 m / 40.7 ft
Beam (width)4.41 m / 14.6 ft
Draft2.16 m / 7.1 ft
Light Displacement (MLC) 16000 kg / 35274 lb
Maximum Displacement16000 kg / 35274 lb

Performance

Critical Hull Speed8.53 knots
Capsize Screening Formula (CSF)1.77
Comfort Ratio36.14
Displacement-Length Ratio (DLR)240
Sail Area to Displacement19.29
Upwind Sail Area to Displacement18.91 m²/T / 204 ft²/T

Above Deck

Mast LayoutKeel stepped mast
Mast Height from DWL19.03 m / 62.5 ft
Rotating SparsNo
Number of Levels of Spreaders3
Spreaders AngleSwept-back
Spars ConstructionAluminum spars
Reported Sail Area119.94 m² / 1291.00 ft²
Upwind Sail Area120.1 m² / 1293 ft²

Engine Room

Engine(s)1 inboard engine
Engine(s) Power75 HP
Fuel typeDiesel
Fuel Tank Capacity750 L / 198.1 gal

Below Deck

Head(s)2
error: Content is protected !!